Aug. 13, 2006 - Valance Tutorial |
Valances are an inexpensive and easy way to cover a window and add color to a room. I made some for my craft room and, including the curtain rod, they only cost me $12.00 and an evening of time to make.
****Please read through the entire tutorial before deciding that this is too confusing! I think it will make more sense at the end! ;)
My first step was to measure the width of my window. The fabric needs to be approximately 2 to 2-1/2 times the width of the window, depending on how much gathering you would like at the top. I used 2-1/2 times the width measurement of my window.
The length of your valance will depend on the size of your window and your preferences. My window is large so I wanted my valance to be approximately 15 inches long from top to bottom. I add approximately 3 inches to this measurement for the top and bottom hem and the casing, equalling 18 inches for length.
I hope this doesn't sound too confusing! Basically, you want to cut your fabric 18 inches X 2 to 2-1/2 times the width measurement of your window. You will end up with a long skinny piece of fabric that looks like this:
(You will probably have to sew 2 or three long strips together to acheive your desired width.)
Now, sew a 1/2 inch hem on three sides of your valance, leaving the 4th long side raw. On the fourth side, iron your fabric under 1/4 inch and then fold it over 2-1/2 inches and sew your seam:
Now for the casing. Measure 1-1/4 inches up from the hem you just sewed and now sew the casing seam (the blue pins are stuck where you should sew your seams):
Viola, you are all done!
All you need to do now is put it on your curtain rod and hang it above your window!
|
| • Post A Comment! |
|
About Me
Homeschooling, crafting, reading, learning and loving my family--one stitch at a time!
Links
• Home
• View my profile
• Archives
• Email Me
|
